Design a lid
A cap or inset lid sized to fit any box. Enter the box's outer size, wall thickness and corner style, tune the fit. Register to download the STL.
Specifications
Style
Cap slips over the box walls; inset rests on the wall tops with a locating plug.
Your box (outer size)
Measure your box, or use Create a lid from any box designer to fill this automatically.
Sized over the stacking rim.
mm
The longer outer dimension.
mm
The shorter outer dimension.
mm
The source box wall — sizes the inset plug.
Match the source box exactly so the lid seats.
mm
The box outer corner radius.
Build
mm
Min 1.5 mm.
Softens the lid's own exposed edges — the mating faces always follow the box corners.
mm
0.5–4 mm.
mm
How far the skirt covers the walls. 6–30 mm.
mm
Min 2 mm.
mm
0.2–0.3 mm per side = snug fit; 0.4 mm or more = loose. Convert these values to the selected unit.
Shallow grooves on two skirt faces for a better pull-off grip.
mm
How far the plug drops into the opening. 3–15 mm.
Print plate-up with slicer supports beneath the plate overhang if needed. With a finger recess, plate-face-down puts the plug above the plate; check bed contact and the recess in your slicer. A bar handle prevents that face from lying flat.
mm
0.3 mm per side (0.03 cm) = easy drop-in fit.
A scalloped depression or a low rounded bar to lift the lid off.
Working…
Rendition